https://www.swe.com/seasafe-subsea-modules/
SWE SeaSafe Subsea Battery Modules
SWE SeaSafe® Autonomous, Smart Battery Modules
- Easy to use battery building blocks
-
29V or 24V, 28Ah size modules
-
Increment in series (V) or Parallel (Ah)
-
Charges with standard power supply
-
Configurable state of charge
-
SWE patented safety protection, smart battery management system
 |
SWE SeaSafe® Smart Battery Module Specifications
|
 |
Higher Performance
- 4X Longer Mission Run Time
- 6X Longer Battery Life Time
- 100% Condition Based Monitoring
Lower Risk
- ABS Certified & 2nd Generation Learned
- 6000 M Pressure Tolerant Tested
- Safety Tested and Patented
Ease of Use
- No Pressure Vessel Required
- Direct in Water Viable
- Simple battery Sizing & Operation
- Series String for Voltage
- Parallel String for Capacity & Power
|
 |
SWE SeaSafe® Diode OR-ing Module
The SWE SeaSafe® Diode OR-ing Module(s) provides an easy, pre-engineered method to electrically parallel connect strings of SWE SeaSafe Battery Modules into a SeaSafe Battery System.
- Parallel connects module strings into a battery system
- Parallel integrates module string outputs into a single discharge bus
- Enables increased current and capacity with SeaSafe Battery Modules
- Electrically Isolates module string charge inputs into isolated charge busses
- Provides additional battery safety, reliability, and potential for faster charge time
- Pressure-tolerant in an oil-filled, pressure-equalized case to depths up to 6000 meters
- Fits in oil-filled, pressure-balanced cases with SeaSafe Modules or into a 1-Atm pressure vessel
- Supports High Voltage – up to 1000 V Battery System
|
 |
SWE SeaSafe® Observer Support Software
- Easy to read Graphical User Interface
- Voltage
- Capacity
- Current
- Temperature
- Status, State of Health
|